Whirlpool ESS 8640 IN Návod k použití stáhnout pdf (Strana 8)

EN 8

CONTROL PANEL DESCRIPTION

Control panel

Boiling

Dual / Triple

zone

Control

panel

lock

On / OffZone selection

control

and display

Power setting controlTimer controls and display

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked.

To unlock the control panel, touch the controls “control panel lock” for 2 seconds. The control panel lock indicator switches off and the hob can be used. Read

the “Control panel lock” paragraph for more details.

Switching the hob ON/OFF

To switch the hob on, touch the

control until the cooking zone displays light up. To switch off, touch the same control until the displays switch off. All the

cooking zones are deactivated.

If within 10 seconds of switching on, no function is selected, the hob switches off automatically.

Switching on and adjusting cooking zones

Power indicator display

Place the pot on the cooking zone, switching the hob on, activate the required cooking zone by touching the corresponding “zone selection control”: “5” will

appear on the display. Slide the nger over the “power setting control” to select the required power level, from min. 0 to max. 9. To conrm the selection wait

10 seconds or touch again the same zone selection control.

Deactivation of cooking zones

To switch off the cooking zone, select the level “0” with the “power setting control”.

The cooking zone switches off and, if still hot, the letter “H” appears on the zone display.

Control panel lock

Control

panel

lock

indicator

This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock,

touch “control panel lock” control; an acoustic signal sounds and a luminous indicator appears on the display.

The control panel is locked except for the switching off function. To deactivate the control panel lock, repeat the

activation procedure.

The presence of water, liquid spilled from pots or any objects resting on the controls can accidentally activate or

deactivate the control panel lock.

Timer

The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used, touch the timer “-” or “+” controls and a beep signals the function. The display shows “00”. The Timer value can be decreased

and increased by keeping the nger on the controls “+” or “-”. After the Timer value selection, the display continue to blink for 5 seconds before the countdown

starts. When the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, select the cooking

zone, touch the Timer controls “-” and “+” simultaneously.

IMPORTANT:

• The indicator blinking next to the timer display shows that the Timer function is active on that zone.

• In case of more than one timer active, on the display is shown the timer with the shorter duration and the corresponding indicator blinks.