Whirlpool HJA1733 Návod k použití stáhnout pdf (Strana 8)

Electrical connection

Electrical connections

Power supply voltage

If the hob already has a power cable, follow the

instructions given on the label attached to the cable.

Connect the appliance to the electricity supply by

means of an all-pole disconnect switch with

minimum contact gap of 3 mm.

Connecting to the terminal board

Connect the yellow/green earth wire to the terminal

with the symbol . This wire must be longer than the

other wires.

1. Remove the terminal block cover (A), undoing the

screw and inserting the cover in the terminal

block hinge (B).

2. Strip approx. 70 mm of sheath from the power

supply cable.

3. Strip approx. 10 mm of sheath from the wires.

Insert the power supply cable into the cable

clamp and connect the wires to the terminal

board as indicated in the diagram next to the

terminal board itself.

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal

block with the removed screw - point (1).

Each time the cooktop is connected to the mains it

carries out an automatic check which lasts several

seconds.

WARNING

• Hob electrical connection must be made before

connecting the appliance to the electricity

supply.

• Electrical connection must be carried out in

compliance with the regulations of the local

electric utility company.

• Make sure that the voltage indicated on the

rating plate on the underside of the appliance

corresponds to the domestic power supply

voltage.

• Regulations require that the appliance is

earthed: use conductors (including the earth

conductor) of the appropriate size only.

• For electrical connection, use an H05 RR-F type

cable as specified in the table “Power supply

voltage”.

The power supply cable must be long enough to

allow the hob to be removed from the worktop. Do

not use extension leads.

Wires Amount x size

230V ~ +

3 X 4 mm

230-240V ~ +

3 X 4 mm

(Australia only)

230V 3 ~ +

4 X 1.5 mm

400V 3N ~ +

5 X 1.5 mm

400V 2N ~ +

4 x 1.5 mm

230V

400V 3N ~

230V ~

230-240V~FOR AU ONLY

230V~FOR UK ONLY

400V 2N ~

230V 3~

ONLY FOR BELGIUM

400V 2N~

FOR NL ONLY

A B

1 2 3 4 5 6 7 8 9 10 11 12 13

Komentáře k této Příručce

Žádné komentáře

Whirlpool HJA1733 Návod k použití Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Whirlpool HJA1733