Whirlpool HOB 461 S Návod k použití

7582569_GB.fm Page 75 Wednesday, March 21, 2001 5:18 PMCyan process 75,0° 133,0 LPI

79When using electrical appliances some important rules must always be followed.In particular:• Never touch the appliance with wet or damp hands or fe

80GAS BURNERSThe flow of gas to the burners is adjusted by the knobs which control the safety-closing taps.Match the mark on the knob with the symbols

80GAS BURNERSThe flow of gas to the burners is adjusted by the knobs which control the safety-closing taps.Match the mark on the knob with the symbols

81ENERGY SAVING HINTS• Use pans with base of the same diameter or slightly larger than that of the burner.• Use only flat-bottomed pans. The use of pa

81USING THE HOBENERGY SAVING HINTS• Use pans with base of the same diameter or slightly larger than that of the burner.• Use only flat-bottomed pans.

82CLEANING THE HOB AND CONTROL PANEL• Before cleaning the hob switch it off and wait for it to cool down.• Clean with a cloth wetted with hot water an

82CLEANING THE HOB AND CONTROL PANEL• Before cleaning the hob switch it off and wait for it to cool down.• Clean with a cloth wetted with hot water an

831. The burner does not light:• Is the gas supply tap switched on?• Has the gas supply (methane) been cut off?• Is the cylinder empty? (Liquid gas).

831. The burner does not light:• Is the gas supply tap switched on?• Has the gas supply (methane) been cut off?• Is the cylinder empty? (Liquid gas).

84• The installation, adjustment and modification of the appliance for the use of other gases (only for cat. II 2H3+ or II 2E+3+ models) must be perfo

75FEATURESPAGE76CONTENTS GBGAS HOB PAGE80BEFORE USING THE HOBPAGE78HINTS FOR PROTECTING THE ENVIRONMENTPAGE78WARNINGS FOR THE USE OF ELECTRICAL APPLIA

84• The installation, adjustment and modification of the appliance for the use of other gases (only for cat. II 2H3+ or II 2E+3+ models) must be perfo

85Technical information for the installer The appliance must be installed by a qualified engineer following the manufacturer’s instructions and in com

85Technical information for the installer The appliance must be installed by a qualified engineer following the manufacturer’s instructions and in com

86INSTALLING SEVERAL DOMINO HOBS SIDE-BY-SIDE Several DOMINO hobs can be installed side-by- side using the special junction piece (code No. AMH 719) a

86INSTALLING SEVERAL DOMINO HOBS SIDE-BY-SIDE Several DOMINO hobs can be installed side-by- side using the special junction piece (code No. AMH 719) a

87INSTALLATION ON UNITS WITH DOOR The unit must be so constructed that when the door is opened or closed, even violently, the pressure or depressure c

87INSTALLATION INSTRUCTIONSINSTALLATION ON UNITS WITH DOOR The unit must be so constructed that when the door is opened or closed, even violently, the

88GAS SUPPLY CONNECTIONBefore the installation, make sure that the local distribution conditions (gas type and pressure) and the setting of this appli

88INSTALLATION INSTRUCTIONSGAS SUPPLY CONNECTIONBefore the installation, make sure that the local distribution conditions (gas type and pressure) and

89IMPORTANT:• Never turn union “C” forcibly without first slackening nut “A”. Never leave it in the horizontal or vertical position.• Gaskets “F” are

762 GAS HOB- This appliance is Class 3 IT ES GB cat. II 2H3+GAS BURNERS1. Medium burner - 1.75 kW2. Large burner - 3.00 kWCONTROL PANEL3. Front

89IMPORTANT:• Never turn union “C” forcibly without first slackening nut “A”. Never leave it in the horizontal or vertical position.• Gaskets “F” are

90IT ES GB Cat. II 2H3+FR BE Cat. II 2E+3+NL Cat. I 2LBURNERSRatedoutput(kW)Lowoutput(kW)G30/G3128-30/37 mbarG2020 mbarby-pass[1/100 mm]injector[1/100

90IT ES GB Cat. II 2H3+FR BE Cat. II 2E+3+NL Cat. I 2LBURNERSRatedoutput(kW)Lowoutput(kW)G30/G3128-30/37 mbarG2020 mbarby-pass[1/100 mm]injector[1/100

91Adjusting the gas burner minimumFor taps with adjusting screw inside the shaft:• with a screwdriver, max. diameter 3 mm, turn the screw inside the t

91Adjusting the gas burner minimumFor taps with adjusting screw inside the shaft:• with a screwdriver, max. diameter 3 mm, turn the screw inside the t

92ELECTRICAL PARTIMPORTANT: Install the hob following the manufacturer’s instructions.Incorrect installation can cause damage to people, animals or th

92ELECTRICAL PARTIMPORTANT: Install the hob following the manufacturer’s instructions.Incorrect installation can cause damage to people, animals or th

762 GAS HOB- This appliance is Class 3 IT ES GB cat. II 2H3+GAS BURNERS1. Medium burner - 1.75 kW2. Large burner - 3.00 kWCONTROL PANEL3. Front

772 GAS HOB- This appliance is Class 3 NL cat. I 2LGAS BURNERS1. Medium burner - 1.75 kW2. Large burner - 3.00 kWCONTROL PANEL3. Front burner cont

772 GAS HOB- This appliance is Class 3 NL cat. I 2LGAS BURNERS1. Medium burner - 1.75 kW2. Large burner - 3.00 kWCONTROL PANEL3. Front burner cont

78• For best use of your hob, read the “Instructions for Use” carefully and keep them in a safe place.• This appliance must only be used for the purpo

78• For best use of your hob, read the “Instructions for Use” carefully and keep them in a safe place.• This appliance must only be used for the purpo

79When using electrical appliances some important rules must always be followed.In particular:• Never touch the appliance with wet or damp hands or fe