Whirlpool OSD89EDE Návod k použití stáhnout pdf (Strana 8)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Start-up and use

WARNING! The oven is provided

with a stop system to extract the

racks and prevent them from coming

out of the oven (1).As shown in the

drawing, to extract them completely,

simply lift the racks, holding them on

the front part, and pull (2).

! The rst time you use your appliance, heat the empty oven with its door

closed at its maximum temperature for at least half an hour. Make sure that

the room is well ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant odour caused by

protective substances used during the manufacturing process burning away.

! To make the setting process easier, keep the knob in position: this will

increase the scrolling speed of the numbers on the display.

! Each setting will automatically be stored in the appliance memory after 10

seconds.

! During operation, we recommend the removal of any crockery or delicate

foodstuffs from the cavities not being used.

! Once cooking has begun, before the DIVIDER is removed, the oven must

be switched off using the

icon.

! Every time the oven is switched on it is set to the CREATION cooking mode.

! The touch controls cannot be activated if the user is wearing gloves.

! In order to optimise the cooking performance, when starting the selected

function, product settings will be applied that could cause a delayed start of

the fan and heating elements.

Control panel lock

! The control panel can be locked while the oven is off, once cooking has

started or nished and during programming.

To lock the oven controls, press and hold the

icon for at least 2 seconds.

A buzzer sounds and the TEMPERATURE display shows the key symbol

“n—O”. The

icon, when lit, indicate lock function activation.

To deactivate the lock, press and hold the icon again for at least 2

seconds.

Setting the clock

! The clock can only be set when the oven is switched off. If the oven is

in standby mode, pressing the

icon once will display the current time

setting. Press it again to set the time.

After connection to the power supply network or after a blackout, the

icon and the digits on the TIME display will ash for 10 seconds.

To set the clock:

1. Press the

icon.

2. Adjust the time as desired by turning the TIMER knob towards “

” and “ ”.

3. Once you have reached the correct hour value, press the

icon.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock. If the icon

ashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

! The minute minder may be set regardless of whether the oven is switched

on or off. It does not switch the oven on or off.

When the set time has elapsed, the minute minder emits a buzzer that will

automatically stop after 30 seconds or when any active button on the control

panel is pressed.

To adjust the minute minder, proceed as follows:

1. Press the

icon.

2. Adjust the time as desired by turning the TIMER knob towards “ ” and “ ”.

3. Once you have reached the desired value, press the

icon again. The lit

symbol will remind you that the minute minder is on.To cancel the minute

minder, press the

icon and use the TIMER knob to set the time to 00:00.

Press the

icon again.

The

icon will switch off to indicate that the minute minder has been

disabled.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan

blows a stream of air between the control panel and the oven door, as well

as towards the bottom of the oven door.In the FAST COOKING mode, the

fan is activated automatically after ten minutes.

! Once the cooking has been completed, the cooling fan remains on until the

oven has cooled down sufciently.

Oven light

The light comes on when the oven door is opened or when a cooking mode

starts.The

icon can be used to switch on the light at any time.

Residual heat indicators

The appliance is tted with a residual heat indicator. When the oven is off, the

“residual heat” light on the display comes on to indicate high temperatures

inside the oven cavity. The indicator light switches off when the inside of the

oven has cooled down.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by

the user (clock and customised durations). To carry out a reset, switch off

the oven, then press and hold the button corresponding to the rst manual

cooking mode (top left) and the

icon simultaneously for 6 seconds.

Once the restore procedure is complete, a buzzer will sound. The rst time

the

icon is pressed, the oven will behave as if it is being switched on

for the rst time.

Standby

This product complies with the requirements of the latest European Directive

on the limitation of power consumption in standby mode. If no buttons are

pressed for 30 minutes and the control panel/door lock has not been activated,

the appliance automatically reverts to standby mode. The standby mode is

visualised by the high luminosity “Watch Icon”. As soon as interaction with

the machine resumes, system operation is restored.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Komentáře k této Příručce

Žádné komentáře

Whirlpool OSD89EDE Návod k použití Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Sporáky Whirlpool OSD89EDE