
6
GB
! The position of the corresponding gas burner is
shown on every knob.
Practical advice on using the burners
Each burner can be adjusted to one of the following
settings using the corresponding control knob:
0 Off
Maximum
Minimum
To light one of the burners, hold a lit match or lighter
near the burner and, at the same time, press down
and turn the corresponding knob anti-clockwise to the
maximum setting.
Since the burner is fitted with a safety device, the
knob should be pressed for approximately 6 seconds
to allow the automatic device keeping the flame
alight to heat up.
When using models with an ignition button, light the
desired burner by first pressing the gas burners
button (identifiable by the
symbol), then pressing
down the corresponding knob as far as possible and
turning it anticlockwise towards the maximum
setting.
! If a flame is accidentally extinguished, turn off the
control knob and wait for at least 1 minute before
trying to relight it.
To switch off the burner, turn the knob in a clockwise
direction until it stops (when reaches the “0” position).
When the selector knob is in any position other than
the off position, the ‘on’ light comes on.
To ensure the burners operate efficiently:
• Use appropriate cookware for each burner (see
table) so that the flames do not extend beyond the
bottom of the cookware.
• Always use cookware with a flat base and a cover.
• When the contents of the pan reach boiling point,
turn the knob to minimum.
Burner ø Cookware Diameter (cm)
Semi Fast (S) 16 - 20
Auxiliary (A) 10 - 14
Triple Crown (TC) 24 - 26
To obtain the best results with the cooktop, several
fundamental rules should be followed while cooking
or preparing food. Use cookware with a flat bottom to
make certain that the pot sets properly on the
cooking area.
Start-up and use
Komentáře k této Příručce