Whirlpool ED25DQ Specifikace stáhnout pdf (Strana 14)

Removing the ice maker storage bin

Remove, empty and clean the storage bin if:

the ice dispenser has not, or will not, be used

for a week or more.

a power failure causes ice in the bin to melt and

freeze together.

the ice dispenser is not used regularly.

To remove ice bin:

1. Pull the covering panel out from the bottom

and slide it to the rear.

2. Lift the signal arm so it clicks into the OFF (up)

position. Ice can still be dispensed, but no

more can be made.

3. Lift the front of the storage bin and pull it out.

4. Empty the ice bin. Use hot or warm water to

melt the ice if necessary. Never use anything

sharp to break up ice in the bin. This can

damage the bin and dispenser mechanism.

5. Wash with mild detergent. Rinse well. Do not

use harsh or abrasive cleaners or solvents.

6. When replacing the bin, make sure it is

pushed in all the way. Then push the signal

arm down to the ON position to restart ice

production.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Žádné komentáře

Whirlpool ED25DQ Specifikace Strana 14