Whirlpool ACM 739/NE Instalační manuál stáhnout pdf (Strana 4)

GB14

Control Panel Description

The control panel is equipped with touch controls: to use them, just press the corresponding symbol (it is not necessary to press hard).

Switching the hob ON/OFF

To switch the hob on, press button for approx. 2 seconds until the cooking zone displays light up.

To switch off, press the same button until the hob switches off. All the cooking zones are switched off.

Switching on and adjusting cooking zones

After switching on the hob and positioning the pot on the chosen cooking zone, adjust the heat setting using the button.

Upon switching on, the display shows heat setting 5.

Each cooking zone has different heat settings that can be adjusted using the buttons +/-, which go from “1”: min. heat setting to “9”: max. heat setting. Some cooking

zones have a fast boil function (Booster), shown on the display with the letter “P”.

Switching off cooking zones

Select the cooking zone to be switched off, pressing the “+” or “-” button (a dot at the bottom right of the power level is displayed).

Press the key “-” to set the level to “0”.

The cooking zone can also be switched off by pressing the “+” and “-” buttons at the same time.

The cooking zone switches off and the residual heat indicator “H” lights up.

Key lock

This function locks the hob controls to prevent accidental switching on. To activate the key lock function, switch on the hob and hold button for three seconds; an

acoustic signal and a luminous indicator above the key signal activation. The control panel is locked with the exception of the OFF function. To unlock the controls,

repeat the key lock activation procedure. The illuminated dot switches off and the hob is active again.

The presence of cleaning water, liquid spilled from pots or any objects resting on the button below the symbol can accidentally activate or deactivate the key lock

function.

Timer

Select the cooking zone to be used with the timer (an illuminated dot appears to the bottom right hand side of the heat setting indicator on the display), then set the

desired cooking time using the buttons “+” and “-” of the timer function (see figure above). A few seconds after the button is pressed, the timer begins the countdown

(the luminous dot of the selected cooking zone starts flashing). Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off

automatically.

To deactivate the timer, press the “-” button until the display shows “0:0” or press the “+” and “-” buttons of the timer at the same time.

IMPORTANT! The timer function can only be used with one cooking zone at a time.

Fast boil function (Booster)

This function, only present on some cooking zones, makes it possible to exploit the hob’s maximum power (for example to bring water to the boil very quickly). To select

this function, press the button “+” until “P” appears on the display or, after switching the hob on, press the “-” button for the selected cooking zone. In this case too,

“P” appears on the display. After 10 minutes’ use of the booster function, the appliance automatically sets the zone to level 9.

INSTRUCTIONS FOR USE

The hob automatically switches off if no function is selected within 10 seconds of switching on.

The timer can be used to set cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for one cooking zone only.

Timer (Minute Minder)

Key lock

The symbols are not

active! To select the

desired functions,

touch the rectangular

areas

Cooking zone controls and corresponding display