Whirlpool AKM 292/IX Návod k použití

17OPERATING INSTRUCTIONSDESCRIPTION OF PRODUCT AND SYMBOLSBURNER OPERATIONPRACTICAL ADVICE FOR USING THE BURNERSGRID POSITIONINGDIMENSIONS AND DISTANC

26FIXING TO THE SUPPORT STRUCTURE - FLUSH-MOUNTING MODELImportant: The following operation must be carried out by a competent technician. Installation

27CONVERSION TO DIFFERENT TYPES OF GASIf a different type of gas to that specified on the dataplate and on the orange sticker on the back of the hob i

28CLEANING AND MAINTENANCEBefore any cleaning and/or maintenance operation, disconnect the hob from power supply and wait until it is cold.Important:

29TROUBLESHOOTING GUIDEIt may happen that the hob does not work or works poorly. Before calling the After-Sales Service, refer to this quick guide.The

18DESCRIPTION OF PRODUCT AND SYMBOLS1.Removable grids2.Semi-rapid burner3.Rapid burner4.Semi-rapid burner5.Auxiliary burner6.Rapid burner control knob

19PRACTICAL ADVICE FOR USING THE BURNERSFor maximum burner efficiency, comply with the following rules:•Use pots and pans of suitable size for each bu

20DIMENSIONS AND DISTANCES TO BE RESPECTED (mm)INJECTOR TABLEINJECTOR TABLE CATEGORY: II2H3+ IT + UKPOWER SUPPLY: 230 V ~ 50 HzIf a hood is installed

21PRECAUTIONS AND GENERAL RECOMMENDATIONSTo ensure best use of your hob, please read these instructions carefully and keep them for future reference.•

22PROTECTING THE ENVIRONMENTPackingThe packing material is entirely recyclable and is marked with the recycling symbol , identifying it as a type of

23INSTALLATION (FLUSH OR SEMI-FLUSH)Technical information for the installerImportant: Given the weight of the product, two people are needed during in

24GAS CONNECTIONELECTRICAL CONNECTIONThe gas supply system must comply with the local regulations.•The section “national regulations” gives the specif

25FIXING TO THE SUPPORT STRUCTURE - CONVENTIONAL FITTED MODEL (SEMI-FLUSH)Important: The following operation must be carried out by a competent techni