Whirlpool FGZ 3400 IN 01 Návod k použití stáhnout pdf (Strana 11)

32

30 mm

Fig. 9

Space for

connections

Depression

space

Door

INSTALLATION ON UNITS WITH

DOORS (fig. 9)

The unit must be so constructed that the

pressure and depressure caused by clo-

sing and opening, even violent, of the

doors does not cause the burners, set

both to the minimum and the maximum,

to go out.

Leave a depression space of 30 mm

between the bottom of the hob and the

top of the unit (Fig. 9).

20 mm min.

40 mm max.

B

C

A

Fig. 10

MOUNTING THE FASTENING TABS

(fig. 10)

✓ Each hob is supplied with a set of tabs

and screws to fasten it to units from 2

to 4 cm thick.

✓ Turn the hob over and put tabs "A" into

the mountings; only tighten screws "B"

a few turns.

✓ Make sure that the tabs are mounted

correctly as shown in Figure 10.

FASTENING THE HOB (fig. 10)

✓ Stretch gasket "C" above the unit

along the edge of the hole made,

being careful to overlay the joining

edges.

✓ Put the hob into the hole cut into the

unit and position it correctly.

✓ Put tabs "A" into place and tighten

screws "B" until the hob is completely

secured.

✓ Using a sharp tool cut off the part of

the gasket which sticks out from the

hob.

INSTALLATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Komentáře k této Příručce

Žádné komentáře