Whirlpool ACM 227 IX Návod k použití stáhnout pdf (Strana 12)

12 / EN

Connecting the power cable

1. If it is not possible to disconnect all

poles in the supply power, a

disconnection unit with at least 3 mm

contact clearance (fuses, line safety

switches, contactors) must be

connected and all the poles of this

disconnection unit must be adjacent

to (not above) the product in

accordance with IEE directives.

Failure to obey this instruction may

cause operational problems and

invalidate the product warranty.

Additional protection by a residual

current circuit breaker is recommended.

If a cable is supplied with the product:

2. For single-phase

connection,connect as identified

below:

• Brown cable = L (Phase)

• Blue cable = N (Neutral)

• Green/yellow cable = (E)

(Ground)

• Push the product towards the

kitchen wall.

• Hook safety chain.

• Adjusting the feet of oven

Vibrations during use may cause

cooking vessels to move. This

dangerous situation can be avoided

if the product is level and balanced.

For your own safety please ensure

the product is level by adjusting the

four feet at the bottom by turning left

or right and align level with the work

top.

For products with cooling fan

1 Cooling fan

2 Control panel

3 Door

The cooling fan cools both the control

panel and the front of the appliance.

Cooling fan continues to run for up

to 20-30 minutes (approx.) even

after the oven is turned off.

Final check

1. Reconnect the product to the mains.

2. Open gas supply.

Compliance with EEE Directive

This product does not contain harmful

and forbidden materials described in the

"Directive on the Restriction of the Use

of Certain Hazardous Substances in

Electrical and Electronic Equipment"

(EEE) issued by the T.R. Ministry of

Environment and Forest.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 174 175

Komentáře k této Příručce

Žádné komentáře