Whirlpool AKM 260/IX Návod k použití stáhnout pdf (Strana 6)

INSTALLATION

Electrical connection

 The electrical connections must comply with local regulations.



The data relevant to the voltage and power absorption are

indicated on the rating plate.

 The earthing of this appliance is compulsory by law.

The manufacturer cannot be held responsible for injury to

persons or animals or damage to property arising from

failure to comply with these requirements.

 When the cooking hob is installed, provide a single-pole

circuit breaker with a contact breaking distance of at

least 3 mm.

 If necessary, the electrical power cable must be replaced

exclusively with a power cable having identical

characteristics to the original supplied by the

manufacturer. This operation must be performed by

Customer Service or a qualified electrician.

Connection to gas supply

The gas supply system must comply with local regulations.

The connection of the cooking hob to the gas pipe network or

gas cylinder must be made by means of a rigid copper or steel

pipe with fittings complying with local regulations, or by means

of a continuous-surface stainless steel hose complying with

local regulations. Interpose gasket 

 in the elbow

connection.

The maximum length of the hose is 2 m.

Important: if a stainless steel hose is used, it must be

installed so as not to touch any movable part of the

furniture. It must pass through an area where there are no

obstructions and where it is possible to inspect it on all its

length.

3gb53211.fm5 Page 17 Monday, June 3, 2002 6:33 PM

1 2 3 4 5 6 7

Žádné komentáře

Whirlpool AKM 260/IX Návod k použití Strana 6